|
|
| Author | Message |
|---|
platinumfungi
  
| #1 posted July 1, 2009 at 11:35am (EST)
edited July 11, 2009 at 1:49pm (EST) |
The Mario package is now sold  Please contact me for any custom orders. Something roughly the level of detail of this Mario is $100. Anything more complex goes up accordingly.
Up for grabs is a modded/customized NES system package. I made this one awhile back, and I'm working on a whole series of these with different 8 bit NES characters. Currently working on Simon Belmont and Mega Man among others 
Here are the special features of the system:
- A "window" / case mod of 8-Bit Super Mario from SMB 1 that lights up red whenever the console is turned on.
- Blue power LED.
- Lockout disabled.
- I also installed a brand new 72 pin connector some time ago. Plays games like new.
Also included:
- 2 modded NES standard controllers with the Nintendo logo, the A button, and the B button backlit red whenever the system is powered on.
- AV cable
- AC adapter
Here are some photos:
 
       
After calculating up my costs and labor, I'm asking $200 shipped OBO for this package. In between planning and the actual work I easily put in at least 10-15 hours just for the Mario case work. So I feel this is a fair rate.
Let me know if you have any questions.
Several people have asked, and YES I am doing custom orders . For a design that's roughly the complexity of this Mario it's $100. For anything more complex it will go up from there.
Thanks for looking!
Check out the GTZ Tech Support / Tech Forum
I'm actively offering modding / customization services Check out my bio page or PM me for more info.
|
Mitsuru
 
 
| | #41 posted July 4, 2009 at 2:04pm (EST) |
Could you mod a 360 case with led lights? |
Animism
| | #42 posted July 4, 2009 at 8:40pm (EST) |
yeah the curve would definitely make it a challenge....probably why theres not modded ps3s sitting around anywhere. But it would certainly be badass...and I would certainly pay for something done. Would be cool having a ps3 with the old PS logo (from the psone days) put on there with lights and whatnot.
Either way. Keep up the good work :) |
Outinthedark
| | #43 posted July 5, 2009 at 2:03am (EST) |
Laser cut?
 |
platinumfungi
| | #44 posted July 5, 2009 at 2:00pm (EST) |
Mitsuru - I'm just now getting into 360 case mods. I should be able to offer services within a few weeks
Animism - The curve would definitely make it much harder, but not impossible. I need to get some broken PS3s or guinea pig ones to do some R&D with. Hopefully in the near future I'll be able to offer case mods for them as well.
Outinthedark - My work? Nope. I wish. It would be much easier/faster, but probably way more expensive due to the cost of the gear. All my designs are hand cut.
Check out the GTZ Tech Support / Tech Forum
I'm actively offering modding / customization services Check out my bio page or PM me for more info.
|
Outinthedark
| | #45 posted July 5, 2009 at 2:10pm (EST) |
platinumfungi wrote:
> Outinthedark - My work? Nope. I wish. It would be much easier/faster,
> but probably way more expensive due to the cost of the gear. All my
> designs are hand cut.
It would probably take less than 5 minutes to cut on my machine after I got the CAD drawings done. I  lasers!
That must be a pain by hand. You should find someone with a laser cutter/etcher locally. You can do some pretty nifty stuff! I etched my phone a year or two ago and everyone on the Helio forums flipped out and wanted me to etch who knows what in their phone/electronics.
|
platinumfungi
| | #46 posted July 5, 2009 at 2:56pm (EST) |
Outinthedark wrote:
> platinumfungi wrote:
>> Outinthedark - My work? Nope. I wish. It would be much easier/faster,
>> but probably way more expensive due to the cost of the gear. All
> my
>> designs are hand cut.
>
> It would probably take less than 5 minutes to cut on my machine after
> I got the CAD drawings done. I lasers!
You own one?
> That must be a pain by hand. You should find someone with a laser
> cutter/etcher locally. You can do some pretty nifty stuff! I etched
> my phone a year or two ago and everyone on the Helio forums flipped
> out and wanted me to etch who knows what in their phone/electronics.
>
Maybe if I knew someone personally. It's been awhile since I've looked, but a few years back when I did it just wasn't cost effective to go to a shop. Any shop wants a set up fee, plus the charge for the actual work and it just makes it way too expensive 
Check out the GTZ Tech Support / Tech Forum
I'm actively offering modding / customization services Check out my bio page or PM me for more info.
|
Outinthedark
| | #47 posted July 5, 2009 at 10:43pm (EST) |
The contract for the machine is much like a lease. I build scale models to go along with my 3D pre viz architectural work. I use it more now for presentation packages though.
If you set up your own CAD files they still charged an arm and a leg? It takes a whole 3 minutes to convert any jpg in Autodesk/AutoCAD even faster if it is just the linework. I guess you gotta pay for the system some how. I know I had a few people sent me their phones and I just charged em like $15 for the etching + shipping. I honestly was just messing around to see if it would work :D
|
platinumfungi
| | #48 posted July 11, 2009 at 1:51pm (EST) |
Now Sold Contact me for any custom orders.
Outinthedark - Sounds cool 
Check out the GTZ Tech Support / Tech Forum
I'm actively offering modding / customization services Check out my bio page or PM me for more info.
|
|
Rules Help 
- 
- 
